A civil engineering procedure called concrete leveling is a method used to level an uneven concrete surface. The procedure attempts to level out an uneven surface by altering the foundation. The procedure can be performed on both residential and commercial properties. It can also be performed on the foundation of a historic building. However, it is important to know exactly what concrete leveling involves before beginning the project. Learn more about this at concrete leveling Phoenix

Concrete leveling is a practical solution for uneven or sunken concrete slabs. The procedure begins with small holes drilled at strategic points. Leveling material is then pumped into these holes to fill in voids and lift the slab to the right level. Some companies even use foam instead of grout, known as foam jacking.

Concrete leveling can be completed quickly, minimizing downtime and disturbance to your property. Depending on the size of your project, the process may take a few hours or a few days. After the repair is completed, you can use the walkway or driveway immediately. However, a driveway may need to be closed off for up to 24 hours.

Polymer injection is another solution for settling concrete. This method involves pumping a foam made of urethane into the concrete slab. When the foam expands, it pushes the concrete back into its correct position. The foam also fills in the voids created by the soil settlement. Polyurethane foam reaches a final strength of 90% in just a few minutes, and is chemically inert and waterproof.

If you notice that your concrete slab is uneven, it may be due to settlement. Sunken slabs are unsightly and dangerous and require expensive repairs. In these cases, hiring a concrete leveling company is a smart alternative to having to replace your entire surface. With the right process, you can have a level surface for your home or business that looks and feels great.

If you are planning to apply Concrete Leveler, the first step in the process is to clean the concrete slab. Make sure to remove all loose debris. This includes any flaking paint, adhesive, and chipped concrete. Additionally, make sure there are no grease or oil stains on the surface. These could compromise the bond between the leveling layer and the concrete beneath it.

Once you have completed the cleaning process, apply Concrete Leveler Primer. A soft-bristle push broom can be used to spread the primer across the slab. Ensure that you get all the concrete pores. A quart of primer can cover an area of 50 to 100 square feet. For larger areas, a gallon-sized container would be appropriate. Allow the primer to dry for three hours before using the concrete leveler.

Self-leveling concrete is a cementitious mix that sets up faster than regular concrete. This mixture is mixed with water and poured into the desired location. Once the concrete is set, the self-leveling concrete will flow evenly.

Contact Info

Dalinghaus Construction
Inc – Phoenix 6442 W Park Ave Chandler
AZ 85226 (480) 741-1544